Busca Bola De Tungsteno, Joyería De Tungsteno , Polvo De Carburo De Tungsteno en el directorio Industry, Reliable fabricante / proveedor / fábrica de China

Buzón de Consultas (0)
Válvulas con bola de carburo de tungsteno 6 mm
Home > Lista de Producto > Carburo de tungsteno > Bola de tungsteno > Válvulas con bola de carburo de tungsteno 6 mm

Válvulas con bola de carburo de tungsteno 6 mm

    Paquete: Embalaje: 1) embalaje interno: cajas de plástico, 2) embalaje externo: cajas de madera.
    Marca: Ferre
    Lugar de origen: Sichuan, China (continental)

Información básica

Modelo: P05, P10, P20, P30, P35, P40, M10, M20, M30, M40, K01, K05, K10, K15

Descripción del producto

Válvulas con bola de carburo de tungsteno 6 mm \ n Descripción: \ n La bola de carburo de tungsteno de 6 mm se utiliza ampliamente en válvulas de bola y rodamientos. Podemos ofrecer varios grados y tamaños. Y los requisitos de cada procedimiento son estrictos \ n para garantizar que los productos producidos cumplan con su solicitud. Adoptamos \ n el técnico avanzado. La bola tiene la causticidad de alta resistencia y la alta resistencia \ n la rutina, lo que podría mejorar la vida útil del rodamiento, al tiempo que eleva el valor de \ n tus productos. \ N Detalles: \ n
Specifications: ISO K10 and K20 are most common
Material Composition Typical Material composition is
6% Cobalt
94% Tungsten Carbide
But other compositions are available with Cobalt content up to 25%. Hardness reduces and toughness increases with increasing cobalt content.
Hardness 1500 to 1600 HV
Corrosion Resistance Cobalt binder material is reasonably resistant to corrosion. The Cobalt binder will corrode in contact with water, but the effect is largely cosmetic in that the balls loose their polished appearance, with little effect on performance. De-ionised water does pose a more severe problem, as it can tend to promote 'leeching' of Cobalt from the binder. Erosion of the binder can be a problem when in contact with abrasive particles as may occur in some valve and pump applications.
Special Properties Hardness if retained to approx. 800 degrees Celsius. Balls can be brazes to steel stems to allow mounting, or hole may be produced by spark erosion.
Availability Balls are made in a wide range of sizes from 0.4mm to 100mm and can be made in larger sizes.
Applications Valves, Pumps, Ball Screws, Measurement Standards, Gauging, Wear Parts.
General Information Cobalt Binder Tungsten Carbide is in many ways an ideal material for ball production. Its hardness and stiffness allows the production of extremely accurate balls, with very fine control of final size. The material is extremely stable and these properties make Tungsten Carbide Balls and ideal choice for reference standards in metrology. Equally, the same properties make the balls and ideal choice for all applications where wear rates need to be low.
Especificaciones: \ n
Tungsten Carbide Ball 6mm are widely used in ball valve and bearing. We can offer various grades and sizes. And the requirements of each procedure are stringent to ensure that the products produced must comply with your request. We adopt the advanced technical. The ball has the high endured causticity and high endure grind, which could improve the life of the bearing, while elevate the value of your products.
Material Composition
Typical Material composition: 6% Cobalt, 94% Tungsten Carbide. 
But other compositions are available with Cobalt content up to 25%. Hardness reduces and toughness increases with increasing cobalt content.
Corrosion Resistance
Cobalt binder material is reasonably resistant to corrosion. The Cobalt binder will corrode in contact with water, but the effect is largely cosmetic in that the balls loose their polished appearance, with little effect on performance. De-ionised water does pose a more severe problem, as it can tend to promote 'leeching' of Cobalt from the binder. Erosion of the binder can be a problem when in contact with abrasive particles as may occur in some valve and pump applications.
Nota: varias combinaciones de diámetro y tamaño se pueden \ suministrar a pedido del cliente. \ n Pantalla: \ n
orte
orte
orte
orte
orte
orte
orte
orte
orte \ n \ n P: ¿Qué es el carburo cementado? \ n A: El carburo cementado es un material duro utilizado en el mecanizado de materiales duros como acero al carbono o \ n inoxidable, así como en situaciones en las que otras herramientas se desgastarían, como la alta -quantity \ n producción se ejecuta. La mayoría de las veces, el carburo dejará un mejor acabado en la pieza y permitirá un mecanizado más rápido \ n. Las herramientas de carburo también pueden soportar temperaturas más altas que las herramientas de acero de alta velocidad estándar. \ N \ n \ n \ n \ n \ n

Grupos de Producto : Carburo de tungsteno > Bola de tungsteno

Enviar a esta empresa
  • *Tema:
  • a:

  • *Mensajes:
    Su mensaje debe ser entre 20 a 8.000 caracteres